Edit Pools wizard
Edit Pools window
CAUTION: In one pool, if the setting operations are performed with two times or more to edit
many setting items, wait until the primary task applies then perform the secondary operation. If the
secondary operation is performed while being applying of the primary task, the primary task is
canceled and the secondary task is applied to the storage system.
DescriptionItem
Select the checkbox, then Enable or Disable when using or not using Smart Tiers
or Smart Tiers Z.
Smart Pool
A pool that consists of the external volumes to which the cache mode is set to
Disable cannot be changed from Disable to Enable.
In Fast Snap, you cannot change the setting of this function.
If TSE-VOL is assigned to the selected pool, the pool cannot be changed from
Disable to Enable.
Specifies the performance monitoring, tier relocation, edit buffer space for new
page assignment, and buffer space for tier relocation if Smart Pool is set to
Enable.
Options for Smart Pool
In Fast Snap, you cannot change the setting of this function.
Edit Pools wizard 325
To Next Page
Loading...
Need help?
General
