DescriptionItem
To change the LDEV name setting, select an LDEV then click this button.Change LDEV Settings
To change the LUN setting, select the checkbox in the table column of port
ID/host group name, select the target LDEV, then click this button.
Change LUN IDs
Add LUN Paths Confirm window
Confirm proposed settings, name the task, then click Apply. The task will be added to the execution
queue.
Added LUNs table
DescriptionItem
Identifier of the LDEV.LDEV ID
Name of the LDEV.LDEV Name
Identifier of the parity group.Parity Group ID
Pool names and pool identifiers.Pool Name (ID)
If the LDEV is not used as a pool-VOL, a hyphen (-) appears.
Emulation types for each logical volume (or logical device).Emulation Type
Size of each logical volume.Capacity
Provisioning types for each logical volume.Provisioning Type
Basic: Internal volume.
External: External volume.
THP: V-VOL of Thin Provisioning.
Snapshot: Fast Snap volume.
Displays the attribute of the LDEV.Attribute
Command Device: Command device.
Remote Command Device: Remote command device.
Hyphen (-): Volume in which the attribute is not defined.
Add LUN Paths wizard 385
To Next Page
Loading...
Need help?
General
