Selected Host Groups table
DescriptionItem
Identifier of the port.Port ID
Name of the host group.Host Group Name
The host mode of the host group.Host Mode
Attribute of the port indicating I/O flow.Port Attribute
• Initiator: Issues I/O commands to a target port when I/O is executed
between storage systems with Continuous Access Synchronous, and so
on.
• Target: Receives I/O commands from a host.
• RCU Target: Receives I/O commands from an initiator when I/O is
executed between storage systems with Continuous Access Synchronous,
and so on.
• External: Issues I/O commands to a target port of an external storage
system with External Storage.
LUN security setting (Enabled or Disabled) on the port.Port Security
Number of hosts registered in the host group.Number of Hosts
Resource group name and identifier of the host group.Resource Group Name (ID)
Details about the selected host group.Detail
Add LUN Paths window
This window provides information about LUs that are already set. You can view information about
the LUN and change the LUN ID.
Add LUN Paths wizard 383
To Next Page
Loading...
