HP XP7 User Manual

7. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Disabling LUN security on a port
One of following roles is required to perform this task:
• Storage Administrator (System Resource Management) role
• Storage Administrator (Provisioning) role
CAUTION: Do not disable LUN security on a port when host I/O is in progress.
1. Click Ports/Host Groups in the Storage Systems tree.
2. Select the Ports tab.
3. Select the desired port.
4. Select Edit Ports The Edit Ports window opens.
5. Select the Port Security checkbox, then select Disable.
6. Click Finish. If disabling LUN security, a message appears, indicating that only host group 0
(the group whose number is 00) is to be enabled. Clicking OK opens the Confirm window.
7. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Setting fibre channel authentication
When configuring a fibre channel environment, use the Authentication window to set user
authentication on host groups, fibre channel ports, and fabric switches of the storage system.
The hosts to be connected must be configured for authentication by host groups (and for
authentication of host groups by the host, if required). For details on how to configure the host for
CHAP authentication, see the documentation of the operating system and fibre channel driver in
your environment.
NOTE: In FCoE networks, user authentication is not supported.
The following topics provide information for managing user authentication on host groups, fibre
channel ports, and fabric switches:
• “User authentication” (page 186)
• “Fibre channel authentication” (page 192)
• “Fibre channel port authentication” (page 196)
• “Setting fibre channel port authentication” (page 196))
• “Registering user information on a fibre channel port” (page 197))
• “Registering user information on a fabric switch” (page 197))
• “Clearing fabric switch user information” (page 198))
• “Setting the fabric switch authentication mode” (page 199))
• “Enabling or disabling fabric switch authentication” (page 199))
User authentication
When configuring a fibre channel environment, use LUN Manager to set user authentication for
ports between the HP XP7 Storage and hosts. In a fibre channel environment, the ports and hosts
186 Managing logical volumes

HP XP7 Specifications

General

Brand	HP
Model	XP7
Category	Storage
Language	English