DescriptionItem
Attribute of the port indicating I/O flow.Port Attribute
• Initiator: Issues I/O commands to a target port when I/O is executed
between storage systems with Continuous Access Synchronous, and so
on.
• Target: Receives I/O commands from a host.
• RCU Target: Receives I/O commands from an initiator when I/O is
executed between storage systems with Continuous Access Synchronous,
and so on.
• External: Issues I/O commands to a target port of an external storage
system with External Storage.
LUN security setting (Enabled or Disabled) on the port.Port Security
Number of hosts registered in the host group.Number of Hosts
Resource group name and identifier of the host group.Resource Group Name (ID)
Model name and serial number of the virtual storage machine that has the
host group.
Virtual Storage Machine
Details about the selected host group.Detail
Removes the selected host groups from the Selected Host Groups table.Remove
Next Task Option
Click Next to go to the task setting window, which is indicated in Next Task Option.
Create Host Groups Confirm window
NOTE: If multiple tasks that are connected in one wizard are executed, this window shows all
configured items of tasks. To show information of configured items other than this topic, click Back
to display related setting windows, then click Help.
Create Host Groups table
DescriptionItem
Identifier of the port.Port ID
Name of the host group.Host Group Name
Create Host Groups wizard 389
To Next Page
Loading...
Need help?
General
