What to do if HP XP7 Storage RWC hangs or BC Z pair tasks fail?
If the RWC hangs or BC Z pair tasks are not properly performed, ensure all BC Z requirements and restrictions are met. Also, verify that the HP XP7 storage system is powered on and fully functional. Finally, check all input values and parameters to ensure that you entered the correct information on the BC Z windows, such as P-VOL and S-VOL IDs.
What to do if BC Z error message appears in HP Storage RWC?
If a BC Z error message is displayed in the RWC during a task, check the error message for the failed task in the RWC.
How to fix HP XP7 Storage volume pairs not displaying correctly?
If the volume pairs are not displaying correctly, select the correct volumes.
How to fix cannot add a pool-VOL on HP Storage?
If you cannot add a pool-VOL on HP Storage, it could be due to: * 1,024 pool-VOLs are already defined in the pool. * The pool-VOL does not fill the requirements for a pool-VOL. To resolve this, change the setting of the LDEV to satisfy the requirement of the Pool-VOL.
What to do if SIM code such as 620XXX, 625000 or 626XXX was issued on HP XP7 Storage?
If you receive SIM code such as 620XXX, 625000 or 626XXX with your HP Storage, it means that the pool usage level exceeds the threshold. To fix this, add pool-VOLs to the pool to increase the free space in the pool.
What to do if SIM code 622XXX was issued on HP XP7 Storage?
If you receive SIM code 622XXX with your HP Storage, it means that the usage of the pool has reached 100%. To fix this, add pool-VOLs to the pool to increase the free space in the pool.
How to fix cannot create a THP V-VOL on HP XP7?
If you are unable to create a THP V-VOL in your HP Storage, it could be due to: * The pool usage has reached 100%. * The available capacity of THP V-VOL is restricted due to the value of Subscription-Limit set for the pool. To resolve this, add some pool-VOLs to the pool or adjust the value of Subscription Limit for the pool.
Why formatted pool capacity displayed in the View Pool Management Status window does not increase on HP XP7?
If the formatted pool capacity displayed in the View Pool Management Status window does not increase on your HP Storage, it might be because another pool is being formatted or the pool usage level reaches up to the threshold. Wait for a while and confirm the display again, or add pool-VOLs to the pool to increase the free space.
What to do if a failure occurs to the application for monitoring the volumes installed in a host on HP XP7?
If a failure occurs to the application for monitoring the volumes installed in a host on HP Storage, it could be because the free space of the pool is insufficient. To resolve this, check the free space of the pool and increase the capacity of the pool.
What to do if a pool cannot be restored on HP XP7 Storage?
If a pool cannot be restored on HP Storage, it may be because the usage of the pool has reached 100%. To resolve this, add some pool-VOLs to the pool to increase the capacity of the pool.
Traditional host-based volume management methods using physical volumes with fixed capacity.
Function used to create, configure, or delete a customized volume (LDEV).
Advanced software for saving costs and reducing management expenses.
Software to reduce storage costs and increase performance using tiered storage media.
License and software installation requirements for Thin Provisioning and Smart Tiers.
Overview of LUN Manager and its role in managing logical volumes.
Troubleshooting steps for Virtual LUN failures.
Instructions for troubleshooting Thin Provisioning issues.
Actions in Remote Web Console GUI and their corresponding RAID Manager commands.
Window to create, delete, view, edit, or export information about resource groups.
Window to view information about parity groups assigned to the logged-on user.
Window for managing pools, displaying capacity, status, and configuration.
Window to assign access attributes to open-system volumes.
Window for managing ports and host groups.
To Next Page
General
