What to do if the host computer tries to access the port, error occurs and the host cannot access the port on HP XP7?
If the host computer tries to access the port, and an error occurs, and the host cannot access the port on HP Storage, it could be because the free space of the pool is insufficient. To resolve this, check the free space of the pool and increase the capacity of the pool.
Why does HP XP7 Storage pool usage level exceed the threshold?
If the pool usage level exceeds the threshold in HP Storage, it could be due to too many THP V-VOLs associated with the pool, too much data stored in the pool, or the pool's capacity being insufficient, or even the threshold being too low. To resolve this, consider adding pool-VOLs to increase the pool's capacity, reclaim zero pages to release space, or set a larger value for the pool's threshold.
Why open-systems hosts cannot read from or write to a volume on HP XP7 Storage?
If open-systems hosts cannot read from or write to a volume on HP Storage, it is because the volume is protected by the read-only attribute. Write failure is reported as an error message.
What to do if HP XP7 Storage RWC hangs or BC Z pair tasks fail?
If the RWC hangs or BC Z pair tasks are not properly performed, ensure all BC Z requirements and restrictions are met. Also, verify that the HP XP7 storage system is powered on and fully functional. Finally, check all input values and parameters to ensure that you entered the correct information on the BC Z windows, such as P-VOL and S-VOL IDs.
Why formatted pool capacity does not increase in HP XP7 Storage?
If the formatted pool capacity displayed in the View Pool Management Status window does not increase in HP Storage, it could be due to another pool being formatted, the pool usage level reaching the threshold, the pool being blocked, high I/O loads to the storage system, the cache memory being blocked, or Pool-VOLs being blocked (including external volumes). To address this, confirm the display again after waiting for a while, add pool-VOLs to increase free space, or confirm the display again after decreasing I/O loads. Contact HP technical support to restore the cache memory.
Why is the ALARM LED on my HP Storage system illuminated?
The ALARM LED might be on due to a temperature issue in the area. Power down the disk array, reduce the room temperature to the recommended operating range, and then power the storage system back on. If the area temperature is not the problem, contact the support center for assistance.
What to do if copy times are extended on HP XP7 due to P-VOL's HDD error?
If copy times are extended, it might be due to an error with the P-VOL's HDD or external storage. Check for any errors and correct them.
Why formatted pool capacity displayed in the View Pool Management Status window does not increase on HP XP7?
If the formatted pool capacity displayed in the View Pool Management Status window does not increase on your HP Storage, it might be because another pool is being formatted or the pool usage level reaches up to the threshold. Wait for a while and confirm the display again, or add pool-VOLs to the pool to increase the free space.
How to fix cannot create a THP V-VOL on HP XP7?
If you are unable to create a THP V-VOL in your HP Storage, it could be due to: * The pool usage has reached 100%. * The available capacity of THP V-VOL is restricted due to the value of Subscription-Limit set for the pool. To resolve this, add some pool-VOLs to the pool or adjust the value of Subscription Limit for the pool.
What to do if SIM code 622XXX was issued on HP XP7 Storage?
If you receive SIM code 622XXX with your HP Storage, it means that the usage of the pool has reached 100%. To fix this, add pool-VOLs to the pool to increase the free space in the pool.
Traditional host-based volume management methods using physical volumes with fixed capacity.
Function used to create, configure, or delete a customized volume (LDEV).
Advanced software for saving costs and reducing management expenses.
Software to reduce storage costs and increase performance using tiered storage media.
License and software installation requirements for Thin Provisioning and Smart Tiers.
Overview of LUN Manager and its role in managing logical volumes.
Troubleshooting steps for Virtual LUN failures.
Instructions for troubleshooting Thin Provisioning issues.
Actions in Remote Web Console GUI and their corresponding RAID Manager commands.
Window to create, delete, view, edit, or export information about resource groups.
Window to view information about parity groups assigned to the logged-on user.
Window for managing pools, displaying capacity, status, and configuration.
Window to assign access attributes to open-system volumes.
Window for managing ports and host groups.
To Next Page
General
