Wall Mounting the Monitor Panel
To mount the monitor panel to an existing wall mounting device or swing arm, purchase an HP
mounting accessory kit. Mounting devices can be purchased separately from HP. Visit
www.hp.com/
support for ordering information.
CAUTION: When handling the monitor, be careful to avoid scratching the screen.
NOTE: The monitor should be mounted to a Video Electronics Standards Association (VESA)
compliant mounting device.
1. If the monitor is installed on the base, press the button on the front of the pedestal and lift the
monitor panel from the base.
Figure 3-10 Removing the Monitor Panel
2. Carefully spread the hinge cover to release it, and then remove the cover.
Figure 3-11 Removing the Hinge Cover
1
2
1
ENWW Wall Mounting the Monitor Panel 15
To Next Page
Loading...
