
Do you have a question about the HP X32C and is the answer not in the manual?
| Panel type | VA |
|---|---|
| Color depth | 8 bit |
| Color gamut | 97 % |
| Pixel pitch | 0.3637 x 0.3637 mm |
| Pixel density | 70 ppi |
| Backlight type | Edge LED |
| Display diagonal | 31.5 \ |
| Surface hardness | 3H |
| Anti-glare screen | Yes |
| Native aspect ratio | 16:9 |
| Screen curvature rating | 1500R |
| Contrast ratio (typical) | 3000:1 |
| Display diagonal (metric) | 80 cm |
| Digital vertical frequency | 60 - 165 Hz |
| Digital horizontal frequency | 30 - 210 kHz |
| Display brightness (typical) | 350 cd/m² |
| Supported graphics resolutions | 640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080) |
| DisplayPort version | 1.4 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 50 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 25 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Package depth | 234.9 mm |
| Package height | 553.7 mm |
| Package weight | 13400 g |
| Cables included | AC, DisplayPort |
| Tilt angle range | -5 - 20 ° |
| Height adjustment | 100 mm |
| Product color | Black |
| Market positioning | Gaming |
| HP segment | Home |
| AMD FreeSync type | FreeSync Premium |
| Depth | 94.7 mm |
| Height | 425.5 mm |
| Depth (with stand) | 55.37 mm |
|---|---|
| Width (with stand) | 70.89 mm |
| Height (with stand) | 23.49 mm |
| Weight (with stand) | 8500 g |
| Depth (without stand) | 9.47 mm |
| Width (without stand) | 708.9 mm |
| Height (without stand) | 42.55 mm |
Crucial safety precautions and essential service information for personnel.
RoHS compliance, general descriptions, firmware updates, and customer return procedures.
Identifies and describes components on the front of the monitor.
Identifies and describes components on the rear of the monitor.
Explains where to find the serial and product numbers on the monitor's label.
Guidelines and equipment needed for safely preparing to disassemble the monitor.
Step-by-step instructions for removing the rear cover of the monitor.
Procedures for locating and removing the power board from the monitor.
Identifies and outlines procedures for repairing HDMI, DP, and Audio connectors.
Covers function tests after repair and common problem-solving steps.