COMPUTER SETUP (F10) 37
Chapter 3
Computer Setup Menu
NOTE The following content is subject to change with new firmware releases, so your menu may be
different than shown below.
Table 3-1 Computer Setup Menu Descriptions
Heading Option Description
File System
Information
Lists product name, processor type/speed/stepping, cache size (L1/L2), system ROM family and
version, installed memory size, chassis serial number, integrated MAC for enabled or embedded
NIC (if applicable), and asset tracking number.
About Displays copyright information.
Set Time and
Date
Enables you to set system time and date.
Save to
Diskette
Saves system configuration, including CMOS, to a formatted, blank 1.44-MB diskette in the
CPQsetup.txt file. Save/Restore for is supported.
Restore from
Diskette
Restores system configuration from a diskette.
Set Defaults
and Exit
Restores factory default settings, which includes clearing any established passwords.
Ignore
Changes and
Exit
Exits Computer Setup without applying or saving any changes.
Save Changes
and Exit
Saves changes to system configuration and exits Computer Setup.