HP Xw6200 - Workstation - 2 GB RAM User Manual

68 REMOVAL AND REPLACEMENT PROCEDURES
Pre-Disassembly Procedures
Perform the following steps before servicing the workstation:
1 Remove/disengage any security devices that prohibit opening the workstation.
2 Close any open software applications.
3 Remove any diskette or compact disc from the workstation.
4 Exit the operating system.
5 Turn off the workstation and any peripheral devices that are connected to it.
6 Remove/disengage any security devices that prohibit opening the workstation.
CAUTION Turn off the workstation before disconnecting any cables.
CAUTION The cooling fan is off only when the workstation is turned off or the power cable has been
disconnected. The cooling fan is always on when the workstation is in the “On” or “Standby” modes. You
must disconnect the power cord from the power source before opening the workstation to prevent
system board or component damage.
7 Disconnect the power cord from the electrical outlet and then from the workstation.
8 Disconnect all peripheral device cables from the workstation.

HP Xw6200 - Workstation - 2 GB RAM Specifications

General

Model	Xw6200
RAM	2 GB
Form Factor	Tower
Chipset	Intel E7525
Category	Workstation
Graphics	Integrated or dedicated (specific model varies)
Product Type	Desktop
Audio Output	Integrated sound card
Networking	Integrated Ethernet
Processor Socket	Socket 604
Optical Drive	DVD-ROM, DVD-RW
Expansion Slots	PCI, PCI-X
Ports	USB, serial, parallel, audio, Ethernet
Operating System	Microsoft Windows XP Professional, Microsoft Windows XP Home