HP Z200 - Small Form Factor Workstation

12
ii. IPv6 Address.
AMT 6.0 supports IPv6 network interface.
Enter a static IPv6 address
Default Setting : None
Recommended Setting : Network Dependent
Example: 2001:db8::1428:57ab
iii. IPv6 default Router.
Enter the IPv6 Default Router address
Default Setting : None
Recommended Setting : Network Dependent
Example: 2001:db8::1428:57ab
iv. Preferred DNS IPv6 Address
Enter the Preferred DNS IPv6 Address
Default Setting : None
Recommended Setting : Network Dependent
Example: 2001:db8::1428:57ab
v. Alternate DNS IPv6 Address
Enter the Alternate DNS IPv6 Address
Default Setting : None
Recommended Setting : Network Dependent
Example: 2001:db8::1428:57ab
9. Activate Network Access.
From the Intel ME Platform Configuration menu, select ‘Activate Network
Access’. Activate Network Access causes the Intel ME to transition to the POST
provisioning state if all required settings are configured.
The ‘Un-configure Network Access’ option will cause the Intel ME to transition
to PRE provisioning state.