EasyManua.ls Logo

HP Z200 - Small Form Factor Workstation

HP Z200 - Small Form Factor Workstation
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
8. TCP/IP Settings.
AMT 6.0 supports IPV4 and IPV6 interface. Follow steps 8a-8f to configure for
IPV4 and 8g-8h for IPV6.
Figure 4: Intel ME TCP/IP Settings Screen
a. Wired LAN IPV4 Configuration
DHCP Mode
Default Setting : Enabled
Recommended Setting : Enabled
DHCP can be used if it is available (TCP/IP settings will be configured by a
DHCP server). If DHCP is disabled, then steps 8b through 8f are required to
configure the IPv4 static IP address for Intel AMT.

Other manuals for HP Z200 - Small Form Factor Workstation

Related product manuals