HP Z200 - Small Form Factor Workstation Setup And Configuration Guide

10
Figure 5: Intel ME Wired LAN IPv4 Configuration Screen
b. IPV4 Address
Enter a static address
Default Setting : 0.0.0.0
Recommended Setting : Network Dependent
Example: 192.168.0.1
Make sure all AMT systems have a unique static IP address. Multiple systems
sharing the same IP address can lead to network collisions, which will cause
the systems to not respond correctly.
c. Subnet Mask
Enter subnet mask
Default Setting : 255.255.255.0
Recommended Setting : Network Dependent
Example: 255.255.255.0
d. Default Gateway Address
Leave as default value and hit Enter
Default Setting : 0.0.0.0
Recommended Setting : Network Dependent
Leave as 0.0.0.0 if this option is not needed.
e. Preferred DNS Address
Leave as default value and hit Enter
Default Setting : 0.0.0.0
Recommended Setting : Network Dependent
Leave as 0.0.0.0 if this option is not needed.

HP Z200 - Small Form Factor Workstation Specifications

General

Brand	HP
Model	Z200 - Small Form Factor Workstation
Category	Desktop
Language	English