EasyManuals Logo

HP Z23i User Manual

HP Z23i
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Connecting the Cables
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Remove the cable management clip from the back of the stand by pressing inward on one side
of the clip (1) and pulling outward on the other side of the clip (2)
3. Depending on your configuration, connect either the DisplayPort, DVI, or VGA video cable
between the PC and the monitor.
NOTE: The monitor is capable of supporting either analog or digital input. The video mode is
determined by the video cable used. The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected by pressing the Input button on the front panel or
through the On-Screen Display (OSD) feature by pressing the Menu button.
For analog operation, connect the VGA signal cable to the VGA connector on the rear of
the monitor and the other end to the VGA connector on the computer (cable provided with
select models).
Connecting the Cables 5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Z23i and is the answer not in the manual?

HP Z23i Specifications

General IconGeneral
3DNo
Pixel pitch0.252 x 0.252 mm
Aspect ratio16:9
Response time8 ms
Display surfaceMatt
Display diagonal23 \
Separate H/V syncYes
Display technologyLED
Vertical scan range50 - 76 Hz
Horizontal scan range24 - 94 kHz
Supported video modes1080p
Contrast ratio (dynamic)5000000:1
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Display brightness (typical)250 cd/m²
Supported graphics resolutions720 x 400, 1600 x 900, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1440 x 900 (WXGA+), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
Mean time between failures (MTBF)30000 h
USB hub version2.0
DVI-I ports quantity0
USB Type-A downstream ports quantity3
Pivot angle0 - 90 °
LED indicatorsPower
Tilt angle range-5 - 30 °
Cable lock slot typeKensington
Panel mounting interface100 x 100 mm
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)36 W
Power consumption (standby)0.5 W
Power consumption (typical)28 W
Power consumption (PowerSave)22 W
CertificationCB, CE, CEL Grade 1, TUV, GS, TCO, GOST, CUL, FCC, E-Star 5.0, CSA, NOM, S-Mark, VCCI, MIC, PSB, ISC, CCC, BSMI, C-Tick, ICES, Microsoft WHQL, TCO
Product colorBlack
Country of originChina
Market positioningBusiness
Operating altitude0 - 5000 m
Non-operating altitude0 - 12192 m
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)20 - 80 %
Package depth183 mm
Package width620 mm
Package height518 mm
Package weight8400 g
Cables includedDVI, DisplayPort, USB
Sustainability certificatesEPEAT Gold, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)242.9 mm
Height (with stand)469.9 mm
Weight (with stand)6400 g
Depth (without stand)51 mm
Width (without stand)544 mm
Height (without stand)329 mm
Weight (without stand)4190 g

Related product manuals