3 Setting up the workstation
This chapter describes how to set up your workstation.
●
Ensuring proper ventilation
●
Setup procedures
●
Adding monitors
●
Installing optional components
●
Security
●
Product recycling
Ensuring proper ventilation
Proper ventilation for the system is important for workstation operation. Follow these guidelines:
●
Operate the workstation on a sturdy, level surface.
●
Provide at least 15.24 cm (6.00 in) of clearance at the front and back of the workstation. (This is the
minimum distance for all workstation models.)
NOTE: Your workstation may look slightly different from the illustration in this section.
●
Ensure that the ambient air temperature falls within the specifications listed in Environmental
specifications on page 10.
Ensuring proper ventilation 11
To Next Page