HP Z32 - Page 12

9
USB-A
USB1
USB2
Molex
https://www.digikey.com
PN:
WM10413TR-ND
Cut off the Pin as below
USB-A
USB3
Molex
https://www.digikey.com
PN:
WM10413TR-ND
Modify the rear cover I/O metal and plastic.
Cut off the Pin as below
NOTE: The connector may need to be modified to meet functionality, regulatory and safety requirements if
it is not an exact match.
You can purchase cables from the HP part store at https://partsurfer.hp.com/Search.aspx.
NOTE: HP continually improves and changes product parts. For complete and current information about
supported parts for your computer, go to http://partsurfer.com, select your country or region, and then
follow the on-screen instructions.