Power Source 100 – 240 VAC, 50/60 Hz
Altitude:
Operating
Storage
0 to 5000 m
0 to 12192 m
0 to 16,400 feet
0 to 40,000 feet
Measured Power Consumption:
Full Power
Typical Settings
Sleep
Bezel Switch Off
<185 watts
<130 watts
<2 watts
<1 watt
Input Terminal One DVI connector with cable included;
one DisplayPort connector with cable
included
Energy Saver Feature
When the monitor is in its normal operating mode, the monitor uses less than 130 watts and the Power
light is blue.
The monitor also supports a reduced power state. The reduced power state will be entered into if the
monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon
detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and
the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize
less than 2 watts of power. There is a brief warm up period before the monitor will return to its normal
operating mode.
Refer to the computer manual for instructions on setting energy saver features (sometimes called power
management features).
NOTE: The above power saver feature only works when connected to computers that have energy
saver features.
Table B-1 ZR30w Specifications (continued)
22 Appendix B Technical Specifications ENWW
To Next Page
Loading...
Need help?
General
Weight and Dimensions
