HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
BEFORE USAGE
If not being installed by a specialist engineer from HPC Laser you will receive
your LS1390 Metal Cutting machine in a wooden crate, which contains the
laser its self and additional accessories.
A suitable-fork lift is required to unload from the courier vehicle and lift the
machine off its pallet.
To dismantle the wooden crate you would require a cross-head screwdriver or
cordless.
If possible please keep the packaging just in case this machine needs a relocate
or shipping for any other reason.
CONTENTS OF DELIVERY
• Transport and service packaging
• Laser including optics
• Accessories box, which contains the following parts:
1. CD Cypcut software / printer driver incl. Operation Manual
2. Mains cable
3. Computer connection USB
4. Computer connection cable (optional)
5. Additional lenses (optional)
6. Nozzles
To Next Page
Loading...