HPC Laser LS1390 User Manual

4
HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
1 GENERAL
Operation Manual Use – General Information
Caution:
Please read the manual properly, before installation and operation. Damage to
persons and/or materials can result from not following individual points of the
Operation Manual!
The symbols below are used for easier understanding of the Operation
Manual:
If the Operation manual is not read properly, this area
represents a particular danger for the operator or the person responsible for
maintenance.
Caution: This component is under voltage. In these areas
strictly observe the safety instructions regarding electricity. Repair work and
maintenance will need to be done with care.
Caution: NEVER stare directly at the laser beam. Strictly
observe possible dangers of the laser beam.
The HPC Laser laser cutter LS1390, is used for engraving and cutting of signs,
metal panels and suchlike.

HPC Laser LS1390 Specifications

General

Brand	HPC Laser
Model	LS1390
Category	Measuring Instruments
Language	English