31 ChassisController release lever (open)
2 Controller
Important:
To avoid electrostatic damage, place array components on a grounded anti-static mat. Use an ESD wrist strap
during removal and replacement.
3 Remove the empty primary PCIe cage (left) from the new controller.
a Lift the tab of the fastener and turn the fastener one half turn (180°) counter clockwise to release the PCIe cage.
b Grasp the PCIe cage with both hands and lift the cage out of the controller.
Replace a Controller 5
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
To Next Page
Loading...
