31 ConnectorFastener
2 Riser card
4 Move the primary PCIe cage (left) from the failed controller to the new controller.
a Lift the tab of the fastener and turn the fastener one half turn (180°) counter clockwise to release the PCIe cage.
b Grasp the PCIe cage with both hands and lift the cage out of the controller to unseat the underlying riser card from
its connector.
c Align the PCIe cage and guide post with the grooves of the new controller, and lower the cage into the controller.
Replace a Controller 6
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
To Next Page
Loading...
