Start Here: Installation, Safety, and Regulatory Information 12
China Altitude
Warning
Table 4: China Altitude Warning
Power Supply Instructions
During the installation, ensure that AC power is NOT connected to the Power Supply.
Shock hazard. To completely remove power from the switch, disconnect all power cords.
For more information, see the Power over Ethernet (PoE/PoE+) Planning and Implementation Guide on
the Hewlett Packard Enterprise Information Library at http://www.hpe.com/support/manuals.
Interior Wiring Warning
Brazil
Statement
Este equipamento deve ser conectado
obrigatoriamente em tomada de rede de
energia elétrica que possua aterramento (três
pinos), conforme a Norma NBR ABNT 5410,
visando a segurança dos usuários contra
choques elétricos.)
Battery Statements:
The only indicator of battery failure is the failure of the switch internal clock to keep the correct time across a reboot or
power cycle. If a battery failure occurs, contact your authorized HPE Aruba Networking representative for assistance.
Batteries are not customer-serviceable and battery failures should be referred only to service personnel authorized by HPE
Aruba Networking.
For important safety, environmental, and regulatory information, see Safety and Compliance Information for Server, Storage,
Power, Networking, and Rack Products, available at
http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts
To Next Page
Loading...
