Installing WLAN antennas
Attach the WLAN antennas to the router and change the antenna orientation from
horizontal to vertical.
Connecting the grounding cable to the router
Correctly connecting the grounding cable is crucial to lightning protection and
EMI protection. Attach the ring terminal provided with the router to the
grounding cable. Make sure the grounding cable is reliably grounded.
!
1 2
You can install two WLAN antennas for the JH297A, JH298A, and JH299A routers.
The JH296A and JH373A routers do not support WLAN antennas.
!
7
8
Connecting an Ethernet cable
Connecting the router to a configuration terminal by using
a console cable
If the configuration terminal does not have an RS-232 serial port, a
serial adapter is required to connect the console cable to a USB port on
the terminal.
!
To Next Page
Loading...
Need help?
General
