HPE SN6000B

Table 6: SAN Switch Rack Mount Kit hardware
Item Description
Two rear mounting
brackets
A right inner rail and
a right outer rail
A left inner rail and a
left outer rail
Fourteen #8-32 x
5/16-inch Phillips
panhead SEMS
screws for use with
the StoreFabric
SN6500B 16Gb FC
Switch. This switch
requires 10 screws.
Fourteen #8-32 x
3/16-inch Phillips
panhead screws with
thread lock (do not
use)
Ten #10-32 x 1/2-
inch Phillips panhead
screws with captive
star lock washers
Eight #10 alignment
washers
Eight #10 adapter
washers
Table Continued
Installing and configuring HPE 16Gb FC switches 27