HPE SN6000B

Table 32: Serial cable pinouts
Pin Signal Description
1 Not supported N/A
2 Not supported N/A
3 UART1_TXD Transmit data
4 GND Logic ground
5 GND Logic ground
6 UART1_RXD Receive data
7 Not supported N/A
8 Not supported N/A
AG default port mapping
SN6000B 16Gb FC Switch AG default port mapping lists the port mappings of F_Ports to N_Ports.
Table 33: SN6000B 16Gb FC Switch AG default port mapping
Total ports F_Ports N_Ports Default port mapping
48 0–39 40–47 0–4 mapped to 40
5–9 mapped to 41
10–14 mapped to 42
15–19 mapped to 43
20–24 mapped to 44
25–29 mapped to 45
30–34 mapped to 46
35–39 mapped to 47
88 AG default port mapping