18
881629-001
5. Maintenance
5.2 Battery module replacement
Safety recommendations
The battery can cause electrocution and high short-circuit currents. The following safety precautions
are required before servicing the battery components:
• Remove watches, rings, bracelets, and all other metal objects from the hands and arms.
• Use tools with an insulated handle.
Battery tray removal
Enterprise
A
A - Remove the front panel.
B - Disconnect the battery module by
separating the connectors. Never pull
on the wires.
C - Remove the plastic protection cover
in front of the battery (one screw).
D - Pull the plastic tab to remove
the battery block and replace it.
Mounting the new battery module
Follow the previous instructions in reverse order.
• To ensure safety and high performance, use only batteries supplied by Hewlett Packard Enterprise.
• Take care to firmly press together the two parts of the connector during remounting.
To Next Page
Loading...
