Before You Start
9
www.heatpressnation.com
TIME, Temperature, and pressure
Time, temperature and pressure are the three settings that you
will work with in every heat press application. The recommended
settings of time, temperature and pressure will typically come
from the instructions of the heat transfer material that you are
working with. However, due to the variety of products that each
user works with (heat presses, t-shirt fabric, substrate and transfer
material, etc,), we do recommend testing and adjusting these
settings to reach an ideal transfer quality for your combination
of products.
Testing pressure before application
Test the pressure before heat pressing anything. If you are pressing
a garment, we would highly recommend performing a simple
paper pressure test.
MPRESS1624
To Next Page
Loading...