HPN MPRESS - Material Guidelines and Settings; Heat Transfer Vinyl Application

Material GUIDELINES
13
www.heatpressnation.com
Heat Transfer Vinyl
Transfer Material Temperature Time Pressure Trim Peel
Siser Easyweed 305F/150C 10-15s Medium-Firm No Hot or Cold
Siser Easyweed Extra 320F/160C 10s Light-Medium No Hot or Cold
Siser Easyweed Stretch 305F/150C 10-15s Medium-Firm No Hot or Cold
Siser Easyweed Electric 305F/150C 15s Medium No Hot or Cold
Siser Glitter 320F/160C 10-15s Firm No Warm
Siser CADFlex 305F/150C 10-15s Medium No Cold
Siser VideoFlex Glitter 305F/150C 10-15s Medium No Cold
Siser Metallic 305F/150C 10-15s Medium No Cold
Siser StripFlock 320F/160C 10-15s Medium No Cold
Siser ReectAll 305F/15v0C 10-15s Medium No Cold
Siser Holographic 320F/160C 10-15s Firm No Cold
Siser Easyweed Glow 305F/150C 2-3s Medium No Hot or Cold
Siser Brick 311F/155C 5-15s Medium-Firm No Cold
Siser ColorPrint Soft 311F/155C 10-15s Medium No Warm
Siser ColorPrint Sublithin 265F/130C 15s Medium No Warm
Siser ColorPrint PU 295F/146C 15-20s Medium No Hot
Siser ColorPrint Glitter 320F/160C 15s Medium No Hot
Siser ColorPrint Extra 320F/160C 10-15s Light No Hot
• Heat Transfer Vinyl
• Heat Transfer Paper
• Sublimation
• Rhinestone
These settings are based off of various internal tests. Time and temperature can vary
depending on the model of heat press.