Material Guidelines
15
www.heatpressnation.com
Common Sublimation Blanks
Substrate Temperature Time Pressure
100% Polyester 375F-385F 45-60 sec. Light
Ceramic Mugs 360F-385F 180-240 sec. Heavy
Ceramic Tiles 400F 4-5 min. Medium
Hardboard Tiles 400F 35-40 sec. Medium
Fabric Coasters 400F 30 sec. Medium
Hardboard Coasters 400F 30-45 sec. Medium
Award Plaques 400F 30-45 sec. Medium
Chromaluxe Panels 400F 90-120 sec. Medium
Mouse Pads 400F 30 sec. Medium
Phone Case Metal Inserts 400F 45-60 sec. Medium
Ceramic Plates 360F 120 sec. Medium
Metal Tags/Badge 400F 30-45 sec. Medium
Magnets 400F 30-45 sec. Medium
Ceramic Ornament 400F 120 sec. Medium
Unisub Ornaments 400F 30-45 sec. Medium
Metal Water Bottles 360F 60-90 sec. Light/Medium
These settings are based off of various internal tests. Time and temperature can vary
depending on the model of heat press.
Orca Coating Mugs
To Next Page
Loading...
