To Next Page

To Previous Page

Prime User Manual

3.2 Power Connection

1.Connect the AC adapter to power receptacle.

2.Connect the power cord to AC adapter.

3.Connect the other end of power cord to the outlet.

Caution

：

⚫ Use the original power adapter only. Avoid the damage caused by charging improperly.

⚫ Please unplug the printer power cord if it is not in use for a long time.

3.3 Peripherals Connection

3.3.1 Interface Cable Connection

1.The standard for the printer’s interface cable shows as follows:

- USB A-Type cable

- USB B-Type cable

- RS-232C cable

- RJ45 cable

2.Based on your own need, follow the instructions to connect the cable.

1) Make sure the printer’s power is off.

2) Please plug in the cables.

-Insert the USB A-Type cable into the USB (type A) interface.

-Insert the USB B-Type cable into the USB (type B) interface.

-Insert the RS-232C cable into the serial interface.

-Insert the RJ45 cable into the ethernet interface.

HPRT Prime User Manual

Questions and Answers: