Need help?Do you have a question about the HPRT MPT-II and is the answer not in the manual?
Be sure to use specified battery and power source; avoid fire, explosion or damage to the printer.
Avoid water spills, improper handling of paper cover, unplugging cables during printing, and incorrect interface usage.
Store printer between -20°C and 70°C with 5-95% humidity. Remove battery for long storage.
Follow manual, avoid water, heat, short circuits, incorrect charging, and reverse polarity for battery safety.
Identifies key parts of the MPT-II printer, including buttons, indicators, interfaces, and covers.
Lists standard accessories like Li-ion battery, power adapter, paper, and optional accessories.
Details printing method, paper width, resolution, speed, and supported content types.
Provides outer dimensions, weight (excluding paper roll), and maximum paper diameter.
Specifies operating and storage temperature ranges and humidity levels for optimal performance.
Covers paper loading, black mark detection, print commands, and power specifications.
Covers essential steps before operation, including battery installation and paper loading.
Instructions for correctly installing the Li-ion battery, paying attention to positive and negative terminals.
Step-by-step guide on how to open the cover and load paper correctly for printing.
Details on how to turn the printer on and off, perform self-tests, and manage paper feeding.
Procedure for powering on the printer using the power button and understanding the power indicator.
Procedure for powering off the printer by holding the power button for 2 seconds.
How to perform a self-test to check printer status and settings by holding FEED and Power buttons.
Describes paper feeding operation, including continuous feed and behavior with black marks.
Instructions for charging the Li-ion battery, including charging methods and indicator lights.
Covers connecting and printing via serial, infrared (IR/IrDA), and Bluetooth interfaces.
Details on connecting the printer using a DB-9 serial interface cable to a host computer.
Instructions for printing using IR and IrDA interfaces, including distance and angle recommendations.
Guide to pairing and printing with the printer via Bluetooth, including password and pairing limits.
Explains the meaning of LED indicators (blue/red) and buzzer sounds for printer status.
Step-by-step guide on installing the printer driver software on your computer.
Reference to a separate technical manual for more in-depth information about the printer.
Details specifications for preprinted black marks to ensure correct recognition by the printer.
To Next Page
General
