MPT-II User Manual
www.hprt.com
14
NOTE:
Please use the manufacturers supplied battery and power adapter , otherwise cause
to printer damage and battery leakage, light and/or explosion.
3.3 Interface and printing
3.3.1 Serial Interfaces
This model of printer uses DB-9 serial interface cable (one end is D model standard
serial interface socket, connected to host computer, the other end is PS/2 socket,
connected to printer)
3.3.2 Infrared ray (IR) & IrDA interface
MPT-II can be connected to your main device through IR, RAW-IR and IrDA can not be
available at the same time. Reset the printer if it is not the model you want.
When printing through RAW-IR and IrDA, make infrared ray of main device right
towards to infrared ray window of printer, distance should be less than 50mm (varies
with main device), angel should be less than 30°.～
3.3.3 Bluetooth
PDA with Bluetooth interface, laptop and other information terminals can drive the
mobile thermal printer MPT-II. Instructions as follows:
1. Power on printer
2. Main device search for outer Bluetooth devices.
3. If there are some outer Bluetooth devices, choose MPT-II.
4. Enter password”0000”
5. Finish matching
Detailed pairing methods, please refer to main devices Bluetooth Names. In pairing,
mobile thermal printer MPT-II must be turn on.
Note: when pairing, do not set many printers on, otherwise it can‘t figure out which
one succeeds in pairing.
Having finished pairing, other main devices (main devices) still can pair with mobile
thermal printer. The max main devices of each printer are 8. If more than 8, the
earliest ones will be deleted from printer paring list automatically. If you these
earliest main devices want to drive printer to print and need pairing again.
After pairing, main devices with virtual Bluetooth interface smart phone , pocket
PC, palm, notebook can drive mobile thermal printer MPT-II to printer through
such virtual
Bluetooth interface. If there is no virtual Bluetooth interface on main devices, please
turn to these suppliers for more information
To Next Page
Loading...
Need help?
General
