HRESYS TL Series User Manual

TL-LFP Series liFePO
4
Battery Operation Manual
10
not exceed the warranty period.
4.Directly handle bulging modules, no matter how long they are stored.
5.Battery performance degradation after long-term storage, please shorten shelf time as possible
as you can.
4.7.3 Recharge process
Recharge the module using a power system:Connect the positive and negative terminals of the
module to the output positive and negative terminals on the DC regulated power supply,
respectively.
Recharge parameter setting
Recharge parameter
Recharge Interval
Charge voltage
54.0V
Charge current
Using the default charge current limit; typically ≤ 0.2C
Termination condition
The charge duration is greater than 10 minutes and the charge
current is less than 0.03C, or the BMS is protected.
Note:Do not perform operations with power on when connecting the recharge cables.
4.8 – Maintenance
 Please clean the dust by the dust collector when dust is accumulated on vent
 Please use clean and dry cloth/fabric to clean up the cabinet, if need further cleaning, please
use neutral cleanser. Alcohol or ammonia synthesis is forbidden.
 Carrying shall be handled gently, prevent from severe compact
 Prevent battery from splashing liquid
 Suggest inspect the tighten of output screw every two years

HRESYS TL Series Specifications

General

Brand	HRESYS
Model	TL Series
Category	Camera Accessories
Language	English