To Next PageTo Next PageWhat to do if my HSM SECURIO AF150c is jammed?
If your HSM Paper Shredder is jammed, it might be because you fed in too much paper. Here's what you can do: * Press the reverse button “R” to remove the stack of paper. * Try taking half the stack of paper and feeding it. * Feed the paper in portions.
How to empty shredded material container in HSM SECURIO AF150c?
To resolve the issue of a full shredded material container in your HSM Paper Shredder, simply empty the container. Additionally, if you press the reverse button briefly before removing the container, part of the material will be pulled back into the cutting apparatus, preventing it from falling out of the document shredder.
What to do if my HSM Paper Shredder is overloaded?
If your HSM Paper Shredder is overloaded, it means the motor has been stressed. To fix this, let the shredder cool down for approximately 15–20 minutes before using it again.
Why does the motor run continually on my HSM SECURIO AF150c Paper Shredder?
The motor running continually on your HSM Paper Shredder without taking paper is usually caused by paper clips or staples in the paper stack. To resolve this, remove the paper clips or staples from the paper and load the stack again.
What to do if container or safety element is open on HSM Paper Shredder?
If the container or safety element is open on your HSM Paper Shredder, ensure that you insert the shredded material container correctly in the base cabinet and fold back the safety element.
What to do if there's a flashing light on my HSM SECURIO AF150c Paper Shredder?
If there's a flashing light on your HSM Paper Shredder, it indicates a fault has occurred while shredding paper. Pull the paper out of the slot to clear the light barrier.
General| Cut Type | Cross-cut |
|---|---|
| Security Level (DIN 66399) | P-4 |
| Sheet Capacity (70 gsm) | 15 sheets |
| Sheet Capacity (80 gsm) | 12 sheets |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Can Shred | Paper clips, Staples, Credit cards |
Read operating manual before first use and follow all safety instructions on the machine.
Warning regarding risk of injury from sharp blades. Never reach into the paper feed slot.
Warning about risk of injury from being pulled in. Keep loose items away from the feed opening.
Machine is not for use by unsupervised children or persons with limited capabilities.
Details on shredding paper, CDs, credit cards and materials that can damage the shredder.
Information on warranty period, special warranties for cutting rollers, and spare parts availability.
Lists and illustrates the main components of the document shredder.
Explains the function of the reverse button and operation button, including display indicators.
Ensuring dry environment, clear ventilation, accessible plug, and correct voltage.
Step-by-step guide for attaching the automatic feed tray to the shredder.
Instructions for activating the shredder using the mains switch and operation button.
How to feed paper directly into the opening and the automatic shut-off mechanism.
Using the auto-feed tray for up to 150 sheets and starting the shredding process.
Guidelines for shredding CDs and credit cards, including safety precautions and disposal.
Explanation of the continuous operation mode and the automatic standby function.
Addresses issues like motor running continuously or not running, and paper jams.
Troubleshooting overload conditions and interpreting fault indicator lights.
Resolving problems related to the shredded material container and safety elements.
Instructions for cleaning the shredder with a soft cloth and mild soap-water solution.
Guidance on oiling the cutting unit to maintain performance and reduce noise.
Information on worn intake rollers and how to replace them via customer service.
Lists the items included in the package, such as the shredder, power cable, and bags.
Details on optional accessories like waste bags and special cutting block oil.
Details on cutting sizes, security levels, and sheet capacity for different cutting types.
Information on weight, cutting speed, intake width, power, and physical dimensions.
Specifies ambient conditions and lists the EU harmonisation legislation met by the device.
