To Next PageTo Next PageHow to fix a paper jam in my HSM SECURIO AF300L4?
If your HSM Paper Shredder is experiencing a paper jam, it might be due to feeding too much paper at once. Try pressing the reverse button to remove the stack. Alternatively, reduce the stack of paper, feed the paper in portions, or open the paper cassette and remove any clips.
What to do if the shredded material container is full on my HSM Paper Shredder?
If your HSM Paper Shredder indicates that the shredded material container is full, you should empty it. Briefly pressing the reverse button before removing the container can help pull some material back into the cutting apparatus, preventing it from falling out.
Why is my HSM SECURIO AF300L4 Paper Shredder overloaded?
If your HSM Paper Shredder is overloaded, it's likely that the motor has overheated. Allow the shredder to cool down for approximately 15-20 minutes before attempting to use it again.
What to do if the container or safety element is open on my HSM SECURIO AF300L4 Paper Shredder?
If your HSM Paper Shredder indicates that the container or safety element is open, ensure that the shredded material container is correctly inserted in the base cabinet and that the safety element is properly folded back.
What to do if the HSM Paper Shredder says overload?
If the HSM Paper Shredder indicates an overload, it means the motor was overloaded. Allow the shredder to cool down for approximately 15–20 minutes before resuming use.
What to do if shredded material container is full in HSM SECURIO AF300L4?
If you see that the shredded material container is full in your HSM Paper Shredder, simply empty the container.
Why is the motor running continually on my HSM SECURIO AF300L4?
If the motor of your HSM Paper Shredder runs continually without taking paper, it's usually because of paper clips or staples in the paper stack. Remove any paper clips or staples and reload the stack.
What to do if the container or safety element is open on HSM SECURIO AF300L4?
If the container or safety element is open on your HSM Paper Shredder, ensure that the shredded material container is correctly inserted in the base cabinet and that the safety element is folded back.
What to do if HSM SECURIO AF300L4 light is flashing?
If the light is flashing on your HSM Paper Shredder, pull the paper out of the slot to clear the light barrier.
What to do if the HSM SECURIO AF300L4 shredded material container is full?
If the shredded material container of your HSM Paper Shredder is full, empty it. Briefly press the reverse button before removing the container to pull some material back into the cutting apparatus, preventing it from falling inside the shredder.
General| Brand | HSM |
|---|---|
| Model | SECURIO AF300L4 |
| Category | Paper Shredder |
| Language | English |
