QUICKLAN 6055
EN - 10
6. MAINTENANCE
6.1. GENERAL INFORMATIONS
1. Whether in use or in storage, please do not exceed the specification requirements to
avoid possible damages or dangers
2. Do not place this meter at high temperatures or humidity or expose it to direct sunlight
3. Be sure to turn off the meter after use. If you expect not to use the tester for a long
time, remove the battery in order to avoid leakages of battery liquid that would damage
the internal parts
6.2. BATTERY REPLACEMENT
When “ ” appears on the display, replace the battery.
CAUTION
Only skilled technicians can open the instrument and replace batteries.
Before removing batteries disconnect the test leads from any energized
circuits to avoid electrical shocks.
1. Switch off the instrument
2. Remove the temperature probe
3. Remove the battery cover
4. Remove the battery from the battery fastener
5. Set the new battery into battery fastener, and return it to the battery case
6. Replace the battery cover
7. Use the appropriate battery disposal methods for Your area
6.3. CLEANING
To clean the instrument use a soft dry cloth. Never use a wet cloth, solvents or water.
6.4. END OF LIFE
CAUTION: this symbol indicates that equipment and its accessories shall be
subject to a separate collection and correct disposal.
To Next Page
Loading...