HT Instruments QUICKLAN 6055 - Technical Specifications; 7.1. Technical Specifications; 7.2. General Specifications

QUICKLAN 6055
EN - 11
7. TECHNICAL SPECIFICATIONS
7.1. TECHNICAL SPECIFICATIONS
Connectors
LAN input connectors RJ45
Cables which can be tested
Cable type UTP, STP
Category CAT3, 5, 5E, 6, 6A, 7
Reference guideline: TIA/EIA 568B
Max height of use: 2000m (6562ft)
Length up to 200m (656ft)
(1)
(1) To perform the test “SPLIT PAIR” the cable must be at least 1m (3.3ft) long
7.2. GENERAL SPECIFICATIONS
Mechanical features
Dimensions (L x W x H): 190 x 65 x 45mm (7 x 3 x 2in)
Weight (with battery): 235g (8 ounces)
Dimensions rem.units (L x W x H): 30 x 25 x 27mm (1 x 1 x 1in)
Weight remote units: 13g (0.5ounces)
Mechanical protection: IP40
Power supply
Battery type 1x9V type IEC 6F22
Battery life ca 600h (backlight OFF), ca 16h (backlight ON)
Auto Power OFF; after 4 minutes of idleness (not disabled)
7.3. ENVIRONMENT
7.3.1. Environmental conditions
Working temperature 0°C ÷ 40 °C (32°F ÷ 104°F)
Relative humidity <80%RH
Storage temperature 0°C ÷ 40°C; (32°F ÷ 104°F)
Storage humidity <80%RH
This product conforms to the prescriptions of the EMC directive 2014/30/EU
This instrument satisfies the requirements of 2011/65/EU (RoHS) directive and
2012/19/EU (WEEE) directive
7.4. ACCESSORIES
7.4.1. Standard accessories
 Remote unit #1
CH1
 Remote unit #2
CH2
 Patch cables RJ45/RJ45, STP, 20cm, 3 pcs
YAAMS0000000
 Battery
 Carrying bag
 User manual
7.4.2. Optional accessories
 Remote unit #3 and cable RJ45/RJ45 STP
REM3
 Remote unit #4 and cable RJ45/RJ45 STP
REM4
 Remote unit #5 and cable RJ45/RJ45 STP
REM5
 Remote unit #6 and cable RJ45/RJ45 STP
REM6
 Remote unit #7 and cable RJ45/RJ45 STP
REM7
 Remote unit #8 and cable RJ45/RJ45 STP
REM8
 Remote units #3 - #8 + 6 cables RJ45/RJ45 STP
REM38