HT4000
EN - 10
4.8. SAVING OF RESULTS
The instrument is capable of storing data relative to air speed measurement into the
internal memory (max 99 locations).
1. When the result is shown on main display press the key ESC / REC
2. The instrument shows an instantaneous message “Memory” on secondary display as
well as the memory location where the result is saved
4.9. RECALL OF RESULTS TO DISPLAY
1. Press and hold the key HOLD / RECALL
2. The instrument displays the messages “Recall”, “Memory” and the result value along
with the memory location on secondary display
3. Press the arrow keys S or T to increase or decrease the number of memory location.
4. Press and hold the key HOLD / RECALL to quit the mode
4.10. CANCELLATION OF INTERNAL MEMORY
1. Press and hold the key / SET to enter the setting mode
2. Use the arrow keys S or T and scroll “CLEAr”
3. Press the key / UNIT to enter the cancellation mode. The instrument displays the
message “Yes”.
4. Confirm pressing the key / UNIT or press the key ESC / REC to quit without
deleting.
To Next Page
Loading...
Need help?
General
