Need help?Do you have a question about the HT GEO416 and is the answer not in the manual?
General| Brand | HT |
|---|---|
| Model | GEO416 |
| Category | Laboratory Equipment |
| Language | English |
General safety guidelines and instrument usage precautions before starting operations.
Instructions and warnings for safe operation of the instrument during measurements.
Procedures for safely shutting down and storing the instrument after use.
Explanation of measurement categories (I, II, III, IV) for electrical safety.
Overview of the instrument's primary functions and measurement capabilities.
Steps for verifying the instrument's condition and included accessories upon receipt.
Information on the instrument's battery power, charging status, and replacement.
Detailed description and labeling of the instrument's controls and display.
Identification and description of the measuring accessories and their components.
Procedure for powering on the instrument and initial display indications.
Explanation of the automatic power-off feature and how to resume operation.
Detailed procedure for performing 3-wire earth resistance measurements.
Detailed procedure for performing 2-wire earth resistance measurements.
Procedure for measuring ground resistivity using the 4-wire method.
Troubleshooting guide for common error messages and abnormal measurement conditions.
Step-by-step guide to saving a measurement to the instrument's memory.
Instructions for deleting stored measurements from memory.
Steps to retrieve and view previously stored measurement data.
General advice for maintaining the instrument's condition and performance.
Detailed steps for safely replacing the instrument's batteries.
Specific technical data for measurement ranges, resolutions, and accuracies.
List of safety and technical standards the instrument complies with.
Details of the instrument's warranty, exclusions, and limitations.
Guidance on contacting support and returning the instrument for service.
Procedure for checking earth resistance coordination with RCDs in TT systems.
Methods for earth resistance measurement using the volta-amperometric technique.
Instructions for safely extending measuring cables without affecting accuracy.
Specific method for measuring earth resistance with small-sized earth rods.
Method for measuring earth resistance with large-sized earth rods.
Method for analyzing ground resistivity to select appropriate earth rods.
Formulas for calculating the resistance of vertical, horizontal, and linked earth rods.
To Next Page