Need help?Do you have a question about the HT HT65 and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Continuity Test | Yes |
| DC Voltage | 600V |
| AC Voltage | 600V |
| DC Current | 10A |
| AC Current | 10A |
| Frequency | 10MHz |
| Temperature | -40°C to 1000°C |
| Dimensions | 45mm |
General safety rules, instrument usage, lead condition, environmental limits.
Recommendations and instructions for safe operation.
Instructions for turning off and storing the instrument.
Explanation of measurement categories (IV, III, II, I) as per IEC/EN61010-1.
Distinction between Average Value and TRMS meters for AC measurements.
Explains RMS value and Crest Factor calculations and meanings.
Checking the instrument for damage and completeness before use.
Information about the battery type and low battery indication.
Guidelines for storing the instrument for precise measurements.
Identification of instrument parts and controls with a diagram.
Describes the functionality of the HOLD, RANGE, REL, and MODE keys.
Explains the LoZ feature and how to disable Auto Power Off.
Step-by-step guide for measuring DC voltage with safety precautions.
Step-by-step guide for measuring AC voltage with safety precautions.
Instructions for measuring AC/DC voltage using the LoZ function.
Procedure for measuring frequency and duty cycle of input voltage.
Steps for performing resistance and continuity tests with safety notes.
Instructions for conducting a diode test with polarity considerations.
Guide for measuring capacitance, including discharge and polarity.
Procedure for measuring temperature using a K-type probe.
Instructions for DC current measurement using transducer clamps.
Instructions for AC current measurement using transducer clamps.
Steps for replacing the instrument's battery when indicated.
Guidelines for cleaning the instrument safely.
Information about proper disposal of the appliance at its end of life.
Detailed specifications for various measurements: Voltage, Current, Resistance, Frequency, etc.
Lists compliance standards and general device properties like size, weight, power supply.
Specifies temperature, humidity, and altitude limits for operation and storage.
Lists the items included in the product package.
Lists available accessories that can be purchased separately.
Details the warranty terms, exclusions, and manufacturer's rights.
Guidance on troubleshooting and contacting service for assistance.
To Next Page