HT7051 - HT7051N
EN - 24
6. If there are no data saved in the
instrument’s memory, upon pressing
the ESC/RECALL MEM key, the
instrument gives a long acoustic signal
and displays the screen reported here
to the side for 3 seconds. Afterwards,
the instrument returns to the initial
screen.
7. If there are no memory cells available
to save the measurement results, upon
pressing the SAVE key, the instrument
gives a long acoustic signal and
displays the screen reported here to the
side for 3 seconds. Afterwards, the
instrument returns to the initial screen.
8. The above-mentioned anomalous situations cannot be saved.
To Next Page
Loading...
