Need help?Do you have a question about the HT IRONMETER and is the answer not in the manual?
General| Continuity Test | Yes |
|---|---|
| Diode Test | Yes |
| Backlight | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Measurement Category | CAT III 600V |
| DC Voltage Accuracy | +/-(0.5%+3) |
| DC Current Accuracy | +/-(0.8%+3) |
| Resistance Accuracy | +/-(0.8%+3) |
| Frequency | 10Hz-10MHz |
| Safety | CAT III 600V |
| Capacitance Range | 100uF |
| Temperature Range | -20℃~1000℃/-4℉~1832℉ |
| DC Voltage | 600V |
| AC Voltage | 600V |
| DC Current | 10A |
| AC Current | 10A |
Initial safety and usage guidance for the instrument.
Recommendations for safe operation of the instrument during measurements.
Steps to verify the instrument's condition before operation.
Detailed explanation of the instrument's function and mode selection buttons.
Detailed specifications including accuracy, input impedance, and protection for various measurements.
To Next Page
