112
Setting Up Wi-Fi
®
Tethering
1. On the Home screen, tap ＞ Wi-Fi
tethering
If the outline of the Wi-Fi
®
Tethering function is
displayed, tap OK.
2. Do one of the following:
• Router name (SSID): The Router name (SSID)
seen from the client (PC etc.) can be changed.
“ISW12HT” is set as the default router name.
• Security: Select a network security method.
• Password: Set the password (WEP key/WPA
key) to encrypt the communication with the
client. A client also needs to enter the WEP key/
WPA key set here.
• Manage users
Allowed users only: Select here when only the
permitted user accesses the Internet.
Max. connections: Set limits of the number of
users that connects into the Internet.
Turning Wi-Fi
®
Tethering On
The connection to the mobile network turns on
automatically when the Wi-Fi
®
Tethering
application is turned on.
The MAC address filtering function is available
in the device by default. The MAC address is a
peculiar number assigned to connected device
when connecting it with Wi-Fi
®
. The MAC
address filtering function confirms the MAC
address, and blocks the connections other than
the registered address. Confirm the connection
according to the following procedures when you
use this function as available.
1. On the Home screen, tap ＞ Wi-Fi
tethering
2. Select the Wi-Fi tethering check box
3. Turn on the Wi-Fi
®
function such as PC
To Next Page
Loading...
