20
Inserting/Removing Battery
■Inserting Battery
1. Remove the Back Cover
Insert your finger into the slot at the bottom of the
Back Cover and lift the cover up gently to remove.
• Do not injure in the edge part of the camera.
• Do not let dust or foreign objects into the keys
and the terminals when the Back Cover is
opened.
• Do not apply excessive force when removing the
Back Cover.
• Before removing the Back Cover, remove the
cable from the external terminal.
memo
• Continuous standby time and continuous talk time
are an average measured in standby mode with
stable signals. Continuous standby time and
continuous talk time may vary with battery charge,
function settings, ambient temperature, signal
strength or other usage conditions.
To Next Page
Loading...
