32
1
Reverse order key: Show the previous
character assigned to the key. You can
cancel the last operation such as returning
the determined characters to the
undetermined state by tapping the key
(Undo).
2
Cursor move key (left): Move the cursor to
the left. Shorten a segment by one character
for sequential segment conversion. Also
used for wild card character prediction.
3
Symbol key: Open symbols/smiley list.
When appears perform alphanumeric
and Japanese kana conversion.
4
Input mode key: Switch input modes
(Hiragana → single-byte alphabets →
single-byte numbers → Voice input →
Hiragana → …). Tap and hold to open a
panel to enable switching of input mode and
switching to a PC like keyboard.
5
Backspace key: Delete a character before
the cursor. Tap and hold for continuous
deletion.
6
Cursor move key (right): Move the cursor to
the right. Extend a segment by one
character for sequential segment
Indicator Input mode
Kanji hiragana
Double-byte katakana
Single-byte katakana
Double-byte alphabets
Single-byte alphabets
Double-byte numbers
Single-byte numbers
Voice input
To Next Page
Loading...
