Usage HTC GL 40 D
20 2.0
4. Press the valve handle in towards the upper cylinder section, so the valve cover
opens for about 1 second. Then release the handle.
5. Repeat points 3-4 above as needed.
6.
Push the slide gate down, see Figure4-8, page20.
Figure 4-8. Push slide gate down
4.7 Making operation easier
In order to keep the suction hose for the dust extractor and the power cable out of the
working area and/or path of the machine, the hose and cable can be arranged as shown
in the picture below.
To Next Page
Loading...
