Getting Connected 117
4. Select the name of the
headset, and click Next.
5. In Passcode, enter the
alphanumeric passcode for
the Bluetooth headset, then
click Next. The passcode is
usually ā0000ā.
A message will appear
saying that your phone has
connected to the headset,
click OK.
6. Enter the display name for
the headset and click Next.
7. Select the check boxes for the Wireless Stereo (if available) and
Hands Free services, and click Done.
Note If the Bluetooth stereo headset becomes disconnected, turn the headset on
and repeat steps 1 to 2 above. Select the stereo headset and click Menu >
Set as Wireless Stereo.
To Next Page
Loading...
