70 Organizing Phone Information
Share contact information
To beam contact information to another device via Bluetooth
1. On the Home screen, click Start > Contacts and then select the
contact whose information you want to beam.
2. Click Menu > Send Contact > Beam.
3. Select the device where you want to beam the contact details to and
click Beam.
Note Before you can beam, make sure Bluetooth is turned on and set to Visible
mode on your phone and the target mobile device. For more information,
see “Bluetooth” in chapter 8.
To send contact information via a text message
1. On the Home screen, click Start > Contacts and then select the
contact whose information you want to send.
2. Click Menu > Send Contact > Text Messages. Select the contact
information that you want to send and click Done.
3. In the new text message, enter the mobile phone number of the
person to whom you are sending the contact information to and click
Send.
To send contact information via MMS
1. On the Home screen, click Start > Contacts.
2. Select a contact, then click Menu > Send as vCard.
3. Enter the recipient in To of the MMS message, then click Send.
If the recipient accepts the beam, text message, or MMS message, the
contact information you sent are automatically saved in that person’s
Contacts list.
To Next Page
Loading...
