Experiencing Multimedia 143
To trim the MP3 file
1. In the Trim screen, use the NAVIGATION CONTROL to select Mark in.
2. Use NAVIGATION left/right to set the Mark in point. After you set the
Mark in point, the song will play back starting from the Mark in point.
Use NAVIGATION left/right to adjust the Mark in point if needed.
3. Use the NAVIGATION CONTROL to select Mark out and then use
NAVIGATION left/right to set the Mark out point. After you set the
Mark out point, the song will play back starting from 5 seconds before
the Mark out point. Use NAVIGATION left/right to adjust the Mark out
point if needed.
4. Use the NAVIGATION CONTROL to select Play. Press CENTER OK to
play back the trimmed song. While playing, you can use NAVIGATION
left/right to go backward or forward through a song.
5. Click Menu and select to whether set the file as the default ring tone,
save the file to the ring tone folder, or save it using another file name.
To Next Page
Loading...
